Revolution

Revolution Lift RTP9

Capacity 9,000 lbs.
Rise w/ Extensions 78-1/4″
Rise w/out Extensions 72″
Overall Height 111-1/4″
Overall Width 138-1/2″
Drive Through Clearance 97-1/4″
Width Inside Columns 111″
Arm Reach (Min/Max) 30″ / 46-1/4″
Min. Adapter Height 4.5″
Driver-Over Height 1-1/2″
Voltage/Amps 208/230, 20 Amps
Motor 2 HP
Min. Ceiling Height 113″ (9′-5″)

Revolution Lift RTP10

Specifications RTP10
Capacity 10,000 lbs. (4535kg)
Rise Maximum Rise 71 -1/4” (1809mm) 76 -1/4” (1937mm) with 5” extension
Overall Height 143” (3632mm)
Overall Width 131” or optional 137” (3327/ 4380mm)
Drive Through Clearance 99” or optional 105” (2515 / 2667mm)
Overhead Switch Height 137-5/8” (3496mm)
Front Reach (Min/Max) 23”/ 44 -1/2” (584mm / 1130mm)
Rear Reach (Min/Max) 36” / 58” (914mm / 1473mm)
Min/Max Adapter Height 3-3/4” (95mm) no adapter extension 8-3/4” (222mm) w/ 5” adapter extension
Width Inside Column 109” or optional 115” (2769mm / 2921mm)
Voltage/Amps 208/230,15 amps; 208/230,16 amps
Motor/Phase 1ph*/2HP/50Hz; 1ph*/2HP/60Hz
Ceiling Height Required 144” (3658mm)
*Optional 3-phase available.

Revolution Lift RTP12

Capacity 12,000 lbs.
Rise 82-1/2″ with adapters
Adjustable Overall Height 165-1/4″ / 177″ (high setup)
Overall Width 150-3/8″
Drive Through Clearance 109-1/2″
Overhead Switch Height 159-3/8″ low / 169-1/2″ high
Front Arm Reach (Min/Max) 38-1/2″ / 57-1/2″
Rear Arm Reach (Min/Max) 38-1/2″ / 57-1/2″
Lifting Pad Height 6″ / 10-1/2″ w/short extension / 14-1/2″ w/high extension
Width Inside Columns 123-1/4″
Voltage/Amps 208/230, 20 Amps
Motor 2 HP / 2 HP / 10* *optional 3-phase available
Speed of Rise 60 seconds

Revolution Lift RTP15

Specifications
RTP15N000 / STANDARD
RTP15N001 / ADDS 20” OF HEIGHT
RTP15N002 / ADDS 52” OF HEIGHT

Capacity:15,000 lbs. (6804kg)

Rise*: 83” (2120mm)

Overall Height: 154-3/4” (3930mm)
                            175” (4445mm)
                            199” (5054mm)

Height to Shut-Off: 147-1/4” (3735mm)
                                   167-1/4” (4250mm)
                                   191-1/4” (4860mm)

Minimum Ceiling Height: 155-3/4” (3956mm)
                                             176” (4470mm)
                                             200” (5080mm)

Overall Floor Width: 154-3/8” (3921mm)

Inside Column Width: 119-5/8” (3038mm)

Drive Through: 108-1/4” (2750mm)

Arm Reach: 38” (965mm) to 61” (1549mm)

Minimum Adapter Height: 5-1/2” (139mm)

Stackable Adapter Height (low extension)
10-1/2” (266mm)

Stackable Adapter Height (high extension)
15-1/2” (393mm)

Voltage/Amps: 208/230v, 20 amps

Motor/Phase: 2 HP/1Ø

Revolution Lift RTP18

Specifications
RTP18N000 / STANDARD
RTP18N001 / ADDS 20” OF HEIGHT
RTP18N002 / ADDS 52” OF HEIGHT

Capacity: 18,000 lbs. (8164kg)

Rise*: 83” (2120mm)

Overall Height: 154-3/4” (3930mm)
                            175” (4445mm)
                            199” (5054mm)

Height to Shut-Off: 147-1/4” (3735mm)
                                   167-1/4” (4250mm)
                                   191-1/4” (4860mm)

Minimum Ceiling Height: 155-3/4” (3956mm)
                                             176” (4470mm)
                                             200” (5080mm)

Overall Floor Width: 154-3/8” (3921mm)

Inside Column Width: 119-5/8” (3038mm)

Drive Through: 108-1/4” (2750mm)

Arm Reach: 38” (965mm) to 61” (1549mm)

Minimum Adapter Height: 5-1/2” (139mm)

Stackable Adapter Height (low extension)
10-1/2” (266mm)

Stackable Adapter Height (high extension)
15-1/2” (393mm)

Voltage/Amps: 208/230v, 20 amps

Motor/Phase: 2 HP/1Ø

RFP14

Capacity 14,000 lbs. (6350kg)
Max. Wheelbase 182 1/2” (4635mm) 215” (5460mm)
Max. Two Wheel Alignment 166 1/4” (4225mm)
Max. Four Wheel Alignment 157” (3987.8mm)
Min. Four Wheel Alignment 88” (2235mm)
Rise 80 3/4” (2051mm)
Length Overall 250” (6350mm) 283” (7188mm)
Width Overall 10’ 11-3/4” (3346mm)
Inside of Columns 116 1/4” (2953mm)
Length Between Front and Rear Columns 195 1/4” (4959mm) 228 1/4” (5798mm)
Height of Columns 7’ 6-1/2” (2281mm)
Width of Runways 20” (508mm)
Height of Runways 9” (228mm)
Width Between Runways 43” (1092mm) or 46” (1168mm)
Front of Runway to Center of Radius Gauge Adj. 22 11/16”- 52 11/16” (576-1339mm)
Motor 2 HP Voltage Single Phase* 208v-230v
Time of Full Rise 72 seconds
*Optional 3-phase available

RFP8

Capacity 8,000 lbs. (3629kg)
Rise 72-1/2” (1842mm)
Overall length with approach ramps 207-1/2” (5270mm)
Overall length without approach ramps 175 -1/2” (4458mm)
Overall width w/o motor 103 -1/2” (2629mm)
Approach ramp Length 32” (813mm)
Runway width 18 -1/2” (470mm)
Runway length 169 -1/2” (4305mm)
Runway height 4 -1/2” (114mm)
Height of columns 81 -1/2” (2070mm)
Clearance between columns 94” (2388mm)
Clearance between runways 38” (965mm)
Outside runway to outside runway 75” (1905mm)
Clearance under runway 68” (1727mm)
Motor specs 110VAC, 1HP

Capacity 9,000 lbs.
Lifting Height 84″
Ceiling Height to be height of highest vehicle to be raised plus 84″
Overall Length w/ Approach Ramps 225-1/2″
Overall Length w/out Approach Ramps 193-1/8″
Overall Width w/ Motor 131″
Overall Width w/out Motor 121-1/2″
Approach Ramp Length 36-1/4″
Runway Tread Width 21-3/4″
Runway Length 184-1/2″
Runway Height 4-3/4″
Height of Columns 97″
Clearance Between Columns 109-1/2″
Width Between Runway Treads 39″
Outside Runway to Outside Runway 79-1/2″
Clearance Under Runways 79-1/4″
Drive Through Width 97″
Height of Columns 97″
Power Unit 110 Volt , 1HP – (220 Volt Optional)
Shipping Weight 2,350 lbs.

Connect With Our Team

517 HERRIMAN CT.
NOBLESVILLE, IN 46060